Share:


Assessment of mechanical properties of high strength concrete (HSC) after exposure to high temperature

    Tomasz Drzymała Affiliation
    ; Wioletta Jackiewicz-Rek Affiliation
    ; Jerzy Gałaj Affiliation
    ; Ritoldas Šukys Affiliation

Abstract

There has been a tendency to design ever slender building construction using high strength concrete in recent years. Application of HSC is also growing in tunnel construction. One of the most important challenges is to control explosive spalling of concrete and the method recommended by Eurocode 2 (EN 1992-1-2:2008/NA:2010P) is addition of polypropylene fibres to the mix. The purpose of the research described in this paper was to evaluate the changes of mechanical properties of HSC exposed to the effect of high temperature. The tests were carried out on three types of high strength concrete: air-entrained concrete, polypropylene fibre-reinforced concrete and reference concrete having constant water/cement ratio. The properties of hardened concrete including compressive strength, tensile splitting strength, flexural strength and E-modulus were studied. The latter tests were carried out on both on concrete cured at 20 °C and concrete subjected to high-temperature conditions at 300 °C, 450 °C and 600 °C. The results enabled us to evaluate the effect of high-temperature conditions on the properties of high-performance concrete and compare the effectiveness of the two methods designed to improve the high-temperature performance of the concrete: addition of polypropylene fibres and entrainment of air.

Keyword : high strength concrete, mechanical properties of HSC, high temperature, effect of high temperature

How to Cite
Drzymała, T., Jackiewicz-Rek, W., Gałaj, J., & Šukys, R. (2018). Assessment of mechanical properties of high strength concrete (HSC) after exposure to high temperature. Journal of Civil Engineering and Management, 24(2), 138-144. https://doi.org/10.3846/jcem.2018.457
Published in Issue
Apr 25, 2018
Abstract Views
1354
PDF Downloads
969
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Arioz, O. 2007. Effects of elevated temperatures on properties of concrete, Fire Safety Journal 42(8): 516–522. https://doi.org/10.1016/j.firesaf.2007.01.003

Bednarek, Z.; Ogrodnik, P.; Pieniak, D. 2010. Laboratory method of evaluation of influence high temperatures on maintenance parameters of the reinforced concrete systems compound, Eksploatacja i niezawodność 47(3): 67–78.

Behnood, A.; Ghandehari, M. 2009. Comparison of compressive and splitting tensile strength of high-strength concrete with and without polypropylene fibers heated to high temperatures, Fire Safety Journal 44(8): 1015–1022. https://doi.org/10.1016/j.firesaf.2009.07.001

Biolzi, L.; Cattaneo, S.; Rosati, G. 2008. Evaluating residual properties of thermally damaged concrete, Cement & Concrete Composites 30(10): 907–916. https://doi.org/10.1016/j.cemconcomp.2008.09.005

Chen, B.; Li, C.; Chen, L. 2009. Experimental study of mechanical properties of normal-strength concrete exposed to high temperatures at an early age, Fire Safety Journal 44(7): 997– 1002. https://doi.org/10.1016/j.firesaf.2009.06.007

Drzymała, T.; Bednarek, Z. 2011a. Analysis of the values of modulus of elasticity measured after exposure to elevated temperature of high-performance concrete reinforced with polypropylene fibres, Logistyka 6 (in Polish).

Drzymała, T.; Bednarek, Z. 2011b. Chosen prospects for use of polypropylene fibre reinforced concrete in applications involving exposure to high temperature, Logistyka 6 (in Polish).

EN 1992-1-2:2008/NA:2010P, Eurocode 2: Design of concrete structures. Parts 1-2: General rules. Structural fire design. European Standards Committee, 2010.

EN 197-1:2012P. Cement. Part 1: Cement. Composition, specifications and conformity criteria for common cements. European Standards Committee, 2012.

EN 206:2014-04. Concrete – Specification, performance, production and conformity. European Standards Committee, 2014.

Erdem, T. K. 2014. Specimen size effect on the residual properties of engineered cementitious composites subjected to high temperatures. Cement and Concrete Composites 45: 1–8. https://doi.org/10.1016/j.cemconcomp.2013.09.019

Ergün, A.; Kürklü, G.; Başpınar, M. S.; Mansour, M. Y. 2013. The effect of cement dosage on mechanical properties of concrete exposed to high temperatures, Fire Safety Journal 55: 160– 167. https://doi.org/10.1016/j.firesaf.2012.10.016

Hager, I.; Tracz, T. 2008. The effect of elevated temperature on the selected properties of high-performance concrete reinforced with rolypropylene fibres, in Concrete Days Conference in Wisła, 2008, Poland (in Polish).

Han, C.-G.; Hwang, Y.-S.; Yang, S.-H.; Gowripalan, N. 2005. Performance of spalling resistance of high performance concrete with polypropylene fibre contents and lateral confinement, Cement and Concrete Research 35(9): 1747–1753. https://doi.org/10.1016/j.cemconres.2004.11.013

Husem, M. 2006. The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete, Fire Safety Journal 41(2): 155–163. https://doi.org/10.1016/j.firesaf.2005.12.002

ISO 834 Fire resistance test elements of building construction. Geneva: International Organization for Standardization, 1985.

Kowalski, R. 2008. Computational evaluation of reinforced concrete components loaded in bending under fire conditions. Warsaw: Warsaw Polytechnic Publishing House (in Polish).

Ling, T.-C.; Poon, C.-S.; Kou, S.-C. 2012. Influence of recycled glass content and curing conditions on the properties of selfcompacting concrete after exposure to elevated temperatures, Cement and Concrete Composites 34(2): 265–272. https://doi.org/10.1016/j.cemconcomp.2011.08.010

Liu, X.; Ye, G.; De Schutter, G.; Yuan, Y.; Taerwe, L. 2008. On the mechanism of polypropylene fibres in preventing fire spalling in self-compacting and high performance cement paste, Cement and Concrete Research 38(4): 487–499. https://doi. org/10.1016/j.cemconres.2007.11.010

Neville, A. M. 2012. Properties of concrete. Cracow: Polski Cement.

Noumowe, A. 2005. Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200 °C, Cement and Concrete Research 35(11): 2192–2198. https://doi.org/10.1016/j.cemconres.2005.03.007

Pliya, P.; Beaucour, A-L.; Noumowé, A. 2011. Contribution of cocktail of polypropylene and steel fibres in improving the behaviour of high strength concrete subjected to high temperature, Construction and Building Materials 25(4): 1926–1934. https://doi.org/10.1016/j.conbuildmat.2010.11.064

PN-88/B-06250 Beton zwykły [Plain concrete]. Polish standard, 1988.

Poon, C.-S.; Azhar, S.; Anson, M.; Wong, Y.-L. 2001. Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures, Cement and Concrete Research 31(9): 1291–1300. https://doi.org/10.1016/S0008-8846(01)00580-4

Saad, A.; Abo-El-Enein, S. A.; Hanna, G. B.; Kotkata, M. F. 1996. Effect of temperature on physical and mechanical properties of concrete containing silica fume, Cement and Concrete Research 26(5): 669–675. https://doi.org/10.1016/S0008-8846(96)85002-2

Xiao, J.; König, G. 2004. Study on concrete at high temperature in China – an overview, Fire Safety Journal 39(1): 89–103. https://doi.org/10.1016/S0379-7112(03)00093-6