Share:


Impact of multi-walled carbon nanotubes on wood sawdust extract cement mortar

    Ekaterina Karpova Affiliation
    ; Gintautas Skripkiūnas Affiliation
    ; Grigory Yakovlev Affiliation
    ; Asta Kičaitė Affiliation

Abstract

It is well known that organic waste materials deteriorate the performance of concrete. The impregnation of organic aggregates and their application in combination with other chemical admixtures and mineral additives are used in order to improve the concrete properties in case of their modification by organic components. The current research is focused on the evaluation of impact of multi-walled carbon nanotubes (MWCNT) on the properties of cement systems prepared based on wood sawdust extract (WSE). The setting time, density, consistency, flexural and compressive strength, water absorption tests were undertaken. The retardation effect of (WSE) on the initial and final setting time of cement paste was observed. The additional modification of cement paste with WSE by MWCNT in the dosage of 0.005% by weight of cement (bwoc) did not show the significant changes in initial and final setting time. The application of MWCNT in the dosage of 0.005% bwoc contributed to the increase of early strength of cement mortar prepared with WSE.


First published online 14 April 2020

Keyword : waste materials, concrete, nanomodification, carbon nanotubes

How to Cite
Karpova, E., Skripkiūnas, G., Yakovlev, G., & Kičaitė, A. (2019). Impact of multi-walled carbon nanotubes on wood sawdust extract cement mortar. Engineering Structures and Technologies, 11(4), 119-124. https://doi.org/10.3846/est.2019.12334
Published in Issue
Dec 31, 2019
Abstract Views
540
PDF Downloads
333
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Ahmed, W., Khushnood, R. A., Memon, S. A., Ahmad, S., Baloch, W. L., & Usman, M. (2018). Effective use of sawdust for the production of eco-friendly and thermal-energy efficient normal weight and lightweight concretes with tailored fracture properties. Journal of Cleaner Production, 184, 1016–1027. https://doi.org/10.1016/j.jclepro.2018.03.009

Aigbomian, E. P., & Fan, M. (2013). Development of wood-crete building materials from sawdust and waste paper. Construction and Building Materials, 40, 361–366. https://doi.org/10.1016/j.conbuildmat.2012.11.018

Aigbomian, E. P., & Fan, M. (2014). Development of wood-crete from treated sawdust. Construction and Building Materials, 52, 353–360. https://doi.org/10.1016/j.conbuildmat.2013.11.025

Bajare, D., Kazjonovs, J., & Korjakins, A. (2013). Lightweight concrete with aggregates made by using industrial waste. Journal of Sustainable Architecture and Civil Engineering, 4(5), 67–73. https://doi.org/10.5755/j01.sace.4.5.4188

Bederina, M., Gotteicha, M., Belhadj, B., Dheily, R. M., Khenfer, M. M., & Queneudec, M. (2012). Drying shrinkage studies of wood sand concrete – Effect of different wood treatments. Construction and Building Materials, 36, 1066–1075. https://doi.org/10.1016/j.conbuildmat.2012.06.010

Boltryk, M., Krupa, A., & Pawluczuk, E. (2018). Modification of the properties of the cement composites with the organic filler. Construction and Building Materials, 167, 143–153. https://doi.org/10.1016/j.conbuildmat.2018.02.025

Cheng, Y., You, W., Zhang, C., Li, H., & Hu, J. (2013). The implementation of waste sawdust in concrete. Engineering, 5, 943–947. https://doi.org/10.4236/eng.2013.512115

Corinaldesi, V. (2010). Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates. Construction and Building Materials, 24, 1616–1620. https://doi.org/10.1016/j.conbuildmat.2010.02.031

European Committee for Standardization. (2016). Methods of testing cement – Part 1: Determination of strength. (EN 196-1). Brussels, Belgium.

European Committee for Standardization. (2012). Cement – Part 1: Composition, specifications and conformity criteria for common cements. (EN 197-1). Brussels, Belgium.

European Committee for Standardization. (2007). Admixtures for concrete, mortar and grout – Test methods – Part 2: Determination of setting time. (EN 480-2). Brussels, Belgium.

European Committee for Standardization. (2005). Mixing water for concrete – Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete. (EN 1008). Brussels, Belgium.

European Committee for Standardization. (2004a). Methods of test for mortar for masonry – Part 3: Determination of consistence of fresh mortar (by flow table) (EN 1015-3). Brussels, Belgium.

European Committee for Standardization. (2004b). Methods of test for mortar for masonry – Part 10: Determination of dry bulk density of hardened mortar. (EN 1015-10). Brussels, Belgium.

European Committee for Standardization. (2020). Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar (EN 1015-11). Brussels, Belgium.

Gil, H., Ortega, A., & Perez, J. (2017). Mechanical behavior of mortar reinforced with sawdust waste. Procedia Engineering, 200, 325–332. https://doi.org/10.1016/j.proeng.2017.07.046

Han, B., Yang, Z., Shi, X., & Yu, X. (2013). Transport properties of carbon-nanotube/cement composites. Journal of Materials Engineering and Performance, 22(1), 184–189 https://doi.org/10.1007/s11665-012-0228-x

Isfahani, F. T., Li, W., & Redaelli, E. (2016). Dispersion of multiwalled carbon nanotubes and its effects on the properties of cement composites. Cement and Concrete Composites, 74, 154–163. https://doi.org/10.1016/j.cemconcomp.2016.09.007

Kawashima, S., Hou, P., Corr, D. J., & Shah, S. P. (2013). Modification of cement-based materials with nanoparticles. Cement and Concrete Composites, 36, 8–15. https://doi.org/10.1016/j.cemconcomp.2012.06.012

Liew, K. M., Sojobi, A. O., & Zhang, L. W. (2017). Green concrete: Prospects and challenges. Construction and Building Materials, 156, 1063–1095. https://doi.org/10.1016/j.conbuildmat.2017.09.008

Madrid, M., Orbe, A., Carre, H., & Garcia, Y. (2018). Thermal performance of sawdust and lime-mud concrete masonry units. Construction and Building Materials, 169, 113–123. https://doi.org/10.1016/j.conbuildmat.2018.02.193

Memon, R. P., Mohd. Sam, A. R., Abdul Awal, A. S. M., & Achekzai, L. (2017). Mechanical and thermal properties of sawdust concrete. Sciences and Engineering, 79(6), 23–27. https://doi.org/10.11113/jt.v79.9341

Mishra, P. C., Singh, V. K., Narang, K. K., & Singh, N. K. (2003). Effect of carboxymethyl-cellulose on the properties of cement. Materials Science and Engineering: A, 357(1–2), 13–19. https://doi.org/10.1016/S0921-5093(02)00832-8

Ossa, A., Garcia, J. L., & Botero, E. (2016). Use of recycled construction and demolition waste (CDW) aggregates: A sustainable alternative for the pavement construction industry. Journal of Cleaner Production, 135, 379–386. https://doi.org/10.1016/j.jclepro.2016.06.088

Ramos, T., Matos, A. M., & Sousa-Coutinho, J. (2013). Mortar with wood waste ash: Mechanical strength carbonation resistance and ASR expansion. Construction and Building Materials, 49, 343–351. https://doi.org/10.1016/j.conbuildmat.2013.08.026

Sobolkina, A., Mechtcherine, V., Khavrus, V., Maier, D., Mende, M., Ritschel, M., & Leonhardt, A. (2012). Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix. Cement and Concrete Composites, 34, 1104–1113. https://doi.org/10.1016/j.cemconcomp.2012.07.008

Sosoi, G., Barbuta, M., Serbanoiu, A. A., Babor, D., & Burlacu, A. (2018). Wastes as aggregate substitution in polymer concrete. Procedia Manufacturing, 22, 347–351. https://doi.org/10.1016/j.promfg.2018.03.052

Vishwakarma, V., & Ramachandran, D. (2018). Green Concrete mix using solid waste and nanoparticles as alternatives – A review. Construction and Building Materials, 162, 96–103. https://doi.org/10.1016/j.conbuildmat.2017.11.174

Wu, Z., Shi, C., Khayat, K. H., & Wan, S. (2016). Effects of different nanomaterials on hardening and performance of ultrahigh strength concrete (UHSC). Cement and Concrete Composites, 70, 24–34. https://doi.org/10.1016/j.cemconcomp.2016.03.003

Zhang, P., Wan, J., Wang, K., & Li, Q. (2017). Influence of nanoSiO2 on properties of fresh and hardened high performance concrete: A state-of-the-art review. Construction and Building Materials, 148, 648–658. https://doi.org/10.1016/j.conbuildmat.2017.05.059