Share:


Properties of hardened cement paste depending on silane based chemical admixtures / Cheminių priedų silanų pagrindu įtaka cementinio akmens savybėms

Abstract

The article focuses on the influence of water repellent, silane based concrete admixtures on the physical, mechanical and porosity properties of hardened cement paste. To obtain the expected results, six compositions of cement slurries were designed changing the amount and type of the silane based chemical admixture. In order to obtain technological, physical and mechanical properties of cement (slurry) stone, the following experiments, including a test on the flow characteristics of cement slurries, a test on compression and bending strength as well as the analysis of porosity and resistance to frost were accomplished. On the basis of the achieved results and using a different amount and type of silane based chemical admixtures, the flow characteristics of cement slurry has increased up to 1,47 times in respect to the control specimen. On the other hand, when using the above introduced silane based chemical admixtures, the obtained results show a decrease in the density and strength of compression and bending. By adding chemical admixture “WACKER BS 1701” 0,2% and taking into account the amount of cement, a decrease in density goes up to 2,4%. The most noticeable decrease in bending strength (26%) is obtained by using WACKER BS SMK 2101 (0,1% in respect to the amount of cement). In addition, the biggest decrease in compression strength (34,6%), considering the control specimen, can be noticed when using SILRES BS 290 (0,2%) as a silane based chemical admixture. Water absorption of the control specimen with no silane based chemical admixtures is very similar to those containing them (vary around 1). The properties of porosity (opened and closed) are also very close and vary around 2% at the maximum. The indicator of medium pore size-λ shows that the control specimen include large pores (λ = 7,92). In most cases, by using the silane based chemical admixture, minor pores are obtained (λ = 0,94 – 3,66). The results received following 100 cycles of freezing-thaw show that all specimens have passed the test. Their surfaces did not contain any cracking.


Santrauka


Straipsnyje nagrinėjama cheminių priedų silanų/siloksanų pagrindu įtaka cementinio akmens fizikinėms ir mechaninėms savybėms bei poringumui. Tyrimams buvo paruoštos šešios cemento tešlos, naudojant skirtingos koncentracijos silanų/siloksanų pagrindu pagamintus cheminius priedus. Tyrimo metu nustatytas cemento tešlos sklidumas, cementinio akmens tankis, lenkimo ir gniuždymo stipriai, poringumo parametrai bei atsparumas šalčiui. Nustatyta, kad naudojant skirtingos koncentracijos silanų/siloksanų pagrindu pagamintus cheminius priedus, cemento tešlos sklidumas padidėjo iki 46,3%, lyginant su kontroline tešla. Cementinio akmens tankis sumažėjo iki 2,4%, lenkimo stipris – iki 21,0%, gniuždymo stipris – iki 34,6%, lyginant su kontroliniu bandiniu be silanų/siloksanų pagrindu pagamintų priedų. Cementinio akmens be cheminių priedų silanų/siloksanų pagrindu vandens įgėris (12,16%), atviras ir uždaras poringumai yra panašūs kaip ir cementinio akmens su cheminiais priedais silanų/siloksanų pagrindu. Cementinio akmens bandiniai išlaikė 100 užšaldymo ir atšildymo ciklų atsparumo šalčiui bandymą.


Reikšminiai žodžiai: silanai/siloksanaicemento tešlacementinis akmuofizikinės ir mechaninės savybėsporingumas

Keyword : silane based concrete admixtures, chemical admixtures, cement slurry, hardened cement paste, compressive strength, porosity water repellent

How to Cite
Ragaišytė, I., Daukšys, M., & Klovas, A. (2012). Properties of hardened cement paste depending on silane based chemical admixtures / Cheminių priedų silanų pagrindu įtaka cementinio akmens savybėms. Engineering Structures and Technologies, 4(1), 29-36. https://doi.org/10.3846/2029882X.2012.677409
Published in Issue
Apr 18, 2012
Abstract Views
46
PDF Downloads
44