Share:


A systematic review of information modelling of individual residential buildings

    Darius Kalibatas Affiliation
    ; Diana Kalibatienė Affiliation
    ; Oleg Kapliński Affiliation

Abstract

Rapidly growing building information modelling (BIM) in construction offers a number of advantages and new opportunities of improving efficiency and effectiveness of the construction process and enhancing the use of emerging technology throughout the project’s lifecycle, not only in new buildings, but also in existing ones, including overall infrastructure. Recently, there has been a great number of publications discussing BIM advantages in construction. A number of review papers summarising BIM usage cases have been published. However, as the preliminary research shows, not all organizations use BIM because of its disadvantages. Therefore, the main aim of this research is to study the extent of available literature on BIM, to determine the current situation of BIM usage, and summarise publications related to the application of BIM. The current study is limited solely to papers available in SpringerLink, ScienceDirect and Thomson Reuters Web of Sciences scientific databases. The obtained results make it clear that BIM case studies and research in academic journals show high level of BIM implementation in practice, and advantages of BIM. However, there are some limitations of BIM usage in practice. Moreover, new trends in the evolving BIM are presented and discussed in this paper.

Keyword : BIM, building information model, construction, literature review

How to Cite
Kalibatas, D., Kalibatienė, D., & Kapliński, O. (2018). A systematic review of information modelling of individual residential buildings. Engineering Structures and Technologies, 10(2), 58-71. https://doi.org/10.3846/est.2018.6479
Published in Issue
Nov 13, 2018
Abstract Views
216
PDF Downloads
106
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Abanda, F. H., & Byers, L. (2016). An investigation of the impact of building orientation on energy consumption in a domestic building using emerging BIM (Building Information Modelling). Energy, 97, 517-527. https://doi.org/10.1016/j.energy.2015.12.135

Ahn, K. U., Kim, Y. J., Park, C. S., Kim, I., & Lee, K. (2014). BIM interface for full vs. semi-automated building energy simulation. Energy and Buildings, 68, 671-678. https://doi.org/10.1016/j.enbuild.2013.08.063

Alwan, Z., Jones, P., & Holgate, P. (2017). Strategic sustainable development in the UK construction industry, through the framework for strategic sustainable development, using Building Information Modelling. Journal of Cleaner Production, 140(1), 349-358. https://doi.org/10.1016/j.jclepro.2015.12.085

Amor, R., Betts, M., Coetzee, G., & Sexton, M. (2002). Information technology for construction: recent work and future directions. Journal of Information Technology in Construction, 7(16), 245-258.

Anil, E. B., Tang, P., Akinci, B., & Huber, D. (2013). Deviation analysis method for the assessment of the quality of the as-is building information models generated from point cloud data. Automation in Construction, 35, 507-516. https://doi.org/10.1016/j.autcon.2013.06.003

Anumba, C. E., Dainty, A., Ison, S., & Sergeant, A. (2006). Understanding structural and cultural impediments to ICT system integration: A GIS-based case study. Engineering, Construction and Architectural Management, 13(6), 616-633. https://doi.org/10.1108/09699980610712409

Anumba, C. J. (2016). Past, present and future directions in Building Information Modelling (BIM). Retrieved from http://www.gcu.ac.uk/ebe/media/gcalwebv2/business/Chimay%20BIM%20Seminar.pdf

Arayici, Y., Coates, P., Koskela, L., Kagioglou, M., Usher, C., & O'reilly, K. (2011). Technology adoption in the BIM implementation for lean architectural practice. Automation in Construction, 20(2), 189-195. https://doi.org/10.1016/j.autcon.2010.09.016

Aranda-Mena, G., Crawford, J., Chevez, A., & Froese, T. (2009). Building information modelling demystified: does it make business sense to adopt BIM?. International Journal of Managing Projects in Business, 2(3), 419-434. https://doi.org/10.1108/17538370910971063

Arksey, H., & O'Malley, L. (2005). Scoping studies: towards a methodological framework. International Journal of Social Research Methodology, 8(1), 19-32. https://doi.org/10.1080/1364557032000119616

Atazadeh, B., Kalantari, M., Rajabifard, A., & Ho, S. (2017). Modelling building ownership boundaries within BIM environment: A case study in Victoria, Australia. Computers, Environment and Urban Systems, 61, 24-38. https://doi.org/10.1016/j.compenvurbsys.2016.09.001

Azhar, S. (2011). Building information modeling (BIM): Trends, benefits, risks, and challenges for the AEC industry. Leadership and Management in Engineering, 11(3), 241-252. https://doi.org/10.1061/(ASCE)LM.1943-5630.0000127

Azzouz, A., Borchers, M., Moreira, J., & Mavrogianni, A. (2017). Life cycle assessment of energy conservation measures during early stage office building design: A case study in London, UK. Energy and Buildings, 139, 547-568. https://doi.org/10.1016/j.enbuild.2016.12.089

Balin, A., & Baraçli, H. (2017). A fuzzy multi-criteria decision making methodology based upon the interval type-2 fuzzy sets for evaluating renewable energy alternatives in Turkey. Technological and Economic Development of Economy, 23(5), 742-763. https://doi.org/10.3846/20294913.2015.1056276

Ben-Alon, L., & Sacks, R. (2017). Simulating the behavior of trade crews in construction using agents and building information modeling. Automation in Construction, 74, 12-27. https://doi.org/10.1016/j.autcon.2016.11.002

Biagini, C., Capone, P., Donato, V., & Facchini, N. (2016). Towards the BIM implementation for historical building restoration sites. Automation in Construction, 71(1), 74-86. https://doi.org/10.1016/j.autcon.2016.03.003

Bilal, M., Oyedele, L. O., Munir, K., Ajayi, S. O., Akinade, O. O., Owolabi, H. A., & Alaka, H. A. (2017). The application of web of data technologies in building materials information modelling for construction waste analytics. Sustainable Materials and Technologies, 11, 28-37. https://doi.org/10.1016/j.susmat.2016.12.004

Björk, B. C. (1999). Information Technology in Construction–domain definition and research issues. Retrieved from
https://helda.helsinki.fi/bitstream/handle/10227/617/bjork.pdf;sequence=2

Borgstein, E. H., Lamberts, R., & Hensen, J. L. M. (2016). Evaluating energy performance in non-domestic buildings: A review. Energy and Buildings, 128, 734-755. https://doi.org/10.1016/j.enbuild.2016.07.018

Cao, D., Wang, G., Li, H., Skitmore, M., Huang, T., & Zhang, W. (2015). Practices and effectiveness of building information modelling in construction projects in China. Automation in Construction, 49, 113-122. https://doi.org/10.1016/j.autcon.2014.10.014

Cerovsek, T. (2011). A review and outlook for a ‘Building Information Model’(BIM): A multi-standpoint framework for technological development. Advanced Engineering Informatics, 25(2), 224-244. https://doi.org/10.1016/j.aei.2010.06.003

Chen, K., Lu, W., Peng, Y., Rowlinson, S., & Huang, G. Q. (2015). Bridging BIM and building: From a literature review to an integrated conceptual framework. International Journal of Project Management, 33(6), 1405-1416. https://doi.org/10.1016/j.ijproman.2015.03.006

Chen, L., & Luo, H. (2014). A BIM-based construction quality management model and its applications. Automation in Construction, 46, 64-73. https://doi.org/10.1016/j.autcon.2014.05.009

Chen, L., & Pan, W. (2016). BIM-aided variable fuzzy multi-criteria decision making of low-carbon building measures selection. Sustainable Cities and Society, 27, 222-232. https://doi.org/10.1016/j.scs.2016.04.008

Chen, P. H., & Nguyen, T. C. (2016). Integrating BIM and Web Map Service (WMS) for Green Building Certification. Procedia Engineering, 164, 503-509. https://doi.org/10.1016/j.proeng.2016.11.651

Choi, J., Choi, J., & Kim, I. (2014). Development of BIM-based evacuation regulation checking system for high-rise and complex buildings. Automation in Construction, 46, 38-49. https://doi.org/10.1016/j.autcon.2013.12.005

Choi, J., Kim, H., & Kim, I. (2015). Open BIM-based quantity take-off system for schematic estimation of building frame in early design stage. Journal of Computational Design and Engineering, 2(1), 16-25. https://doi.org/10.1016/j.jcde.2014.11.002

Chwieduk, D. (2003). Towards sustainable-energy buildings. Applied Energy, 76(1), 211-217. https://doi.org/10.1016/S0306-2619(03)00059-X

Ciribini, A. L. C., Ventura, S. M., & Paneroni, M. (2016). Implementation of an interoperable process to optimise design and construction phases of a residential building: A BIM Pilot Project. Automation in Construction, 71(1), 62-73. https://doi.org/10.1016/j.autcon.2016.03.005

Costa, G., & Madrazo, L. (2015). Connecting building component catalogues with BIM models using semantic technologies: An application for precast concrete components. Automation in Construction, 57, 239-248. https://doi.org/10.1016/j.autcon.2015.05.007

Delone, W. H., & McLean, E. R. (2003). The DeLone and McLean model of information systems success: a ten-year update. Journal of Management Information Systems, 19(4), 9-30. https://doi.org/10.1080/07421222.2003.11045748

Di, G. M. (2015). BIM and energy efficient retrofitting in school buildings. Energy Procedia, 78(November), 1045-1050.

Ding, L. Y., Zhong, B. T., Wu, S., & Luo, H. B. (2016). Construction risk knowledge management in BIM using ontology and semantic web technology. Safety Science, 87, 202-213. https://doi.org/10.1016/j.ssci.2016.04.008

Eleftheriadis, S., Mumovic, D., & Greening, P. (2017). Life cycle energy efficiency in building structures: A review of current developments and future outlooks based on BIM capabilities. Renewable and Sustainable Energy Reviews, 67, 811-825. https://doi.org/10.1016/j.rser.2016.09.028

Gal, U., Lyytinen, K., & Yoo, Y. (2008). The dynamics of IT boundary objects, information infrastructures, and organisational identities: The introduction of 3D modelling technologies into the architecture, engineering, and construction industry. European Journal of Information Systems, 17(3), 290-304. https://doi.org/10.1057/ejis.2008.13

Ganah, A., & John, G. A. (2015). Integrating building information modeling and health and safety for onsite construction. Safety and Health at Work, 6(1), 39-45. https://doi.org/10.1016/j.shaw.2014.10.002

Gao, G., Liu, Y. S., Lin, P., Wang, M., Gu, M., & Yong, J. H. (2015). BIMTag: Concept-based automatic semantic annotation of online BIM product resources. Advanced Engineering Informatics, 31, 48-61. https://doi.org/10.1016/j.aei.2015.10.003

Ghaffarianhoseini, A., Tookey, J., Ghaffarianhoseini, A., Naismith, N., Azhar, S., Efimova, O., & Raahemifar, K. (2017). Building Information Modelling (BIM) uptake: Clear benefits, understanding its implementation, risks and challenges. Renewable and Sustainable Energy Reviews, 75, 1046-1053. https://doi.org/10.1016/j.rser.2016.11.083

Giesekam, J., Barrett, J., Taylor, P., & Owen, A. (2014). The greenhouse gas emissions and mitigation options for materials used in UK construction. Energy and Buildings, 78, 202-214. https://doi.org/10.1016/j.enbuild.2014.04.035

Gourlis, G., & Kovacic, I. (2016). Building Information Modelling for analysis of energy efficient industrial buildings – A case study. Renewable and Sustainable Energy Reviews, 68(2), 953-963.

Guo, S. J., & Wei, T. (2016). Cost-effective energy saving measures based on BIM Technology: Case study at National Taiwan University. Energy and Buildings, 127, 433-441. https://doi.org/10.1016/j.enbuild.2016.06.015

Ham, Y., & Golparvar-Fard, M. (2015). Mapping actual thermal properties to building elements in gbXML-based BIM for reliable building energy performance modeling. Automation in Construction, 49, 214-224. https://doi.org/10.1016/j.autcon.2014.07.009

Han, K. K., & Golparvar-Fard, M. (2015). Appearance-based material classification for monitoring of operation-level construction progress using 4D BIM and site photologs. Automation in Construction, 53, 44-57. https://doi.org/10.1016/j.autcon.2015.02.007

Han, K. K., & Golparvar-Fard, M. (2017). Potential of big visual data and building information modeling for construction performance analytics: An exploratory study. Automation in Construction, 73, 184-198. https://doi.org/10.1016/j.autcon.2016.11.004

Han, K. K., Cline, D., & Golparvar-Fard, M. (2015). Formalized knowledge of construction sequencing for visual monitoring of work-in-progress via incomplete point clouds and low-LoD 4D BIMs. Advanced Engineering Informatics, 29(4), 889-901. https://doi.org/10.1016/j.aei.2015.10.006

Hongling, G., Yantao, Y., Weisheng, Z., & Yan, L. (2016). BIM and safety rules based automated identification of unsafe design factors in construction. Procedia Engineering, 164, 467-472. https://doi.org/10.1016/j.proeng.2016.11.646

Hosseini, S. T., Lale Arefi, S., Bitarafan, M., Abazarlou, S., & Zavadskas, E. K. (2016). Evaluation types of exterior walls to reconstruct Iran earthquake areas (Ahar Heris Varzeqan) by using AHP and fuzzy methods. International Journal of Strategic Property Management, 20(3), 328-340. https://doi.org/10.3846/1648715X.2016.1190794

Hoxha, E., Habert, G., Lasvaux, S., Chevalier, J., & Le Roy, R. (2017). Influence of construction material uncertainties on residential building LCA reliability. Journal of Cleaner Production, 144, 33-47. https://doi.org/10.1016/j.jclepro.2016.12.068

Ilhan, B., & Yaman, H. (2016). Green building assessment tool (GBAT) for integrated BIM-based design decisions. Automation in Construction, 70, 26-37. https://doi.org/10.1016/j.autcon.2016.05.001

Irizarry, J., Karan, E. P., & Jalaei, F. (2013). Integrating BIM and GIS to improve the visual monitoring of construction supply chain management. Automation in Construction, 31, 241-254. https://doi.org/10.1016/j.autcon.2012.12.005

Isikdag, U., & Underwood, J. (2010, May). A synopsis of the handbook of research on building information modeling. In Proceedings of CIB 2010 World Building Congress (pp. 84-96). Salford, MA, USA.

Jalaei, F., Jrade, A., & Nassiri, M. (2015). Integrating Decision Support System (DSS) and Building Information Modeling (BIM) to optimize the selection of sustainable building components. Journal of Information Technology in Construction (ITcon), 20(25), 399-420.

Jia, M., Srinivasan, R. S., & Raheem, A. A. (2017). From occupancy to occupant behavior: An analytical survey of data acquisition technologies, modeling methodologies and simulation coupling mechanisms for building energy efficiency. Renewable and Sustainable Energy Reviews, 68, 525-540. https://doi.org/10.1016/j.rser.2016.10.011

Jiao, Y., Zhang, S., Li, Y., Wang, Y., & Yang, B. (2013). Towards cloud augmented reality for construction application by BIM and SNS integration. Automation in Construction, 33, 37-47. https://doi.org/10.1016/j.autcon.2012.09.018

Johansson, M., Roupé, M., & Bosch-Sijtsema, P. (2015). Real-time visualization of building information models (BIM). Automation in Construction, 54, 69-82. https://doi.org/10.1016/j.autcon.2015.03.018

Juan, Y. K., Lai, W. Y., & Shih, S. G. (2017). Building information modeling acceptance and readiness assessment in Taiwanese architectural firms. Journal of Civil Engineering and Management, 23(3), 356-367. https://doi.org/10.3846/13923730.2015.1128480

Jung, Y., & Joo, M. (2011). Building information modelling (BIM) framework for practical implementation. Automation in Construction, 20(2), 126-133. https://doi.org/10.1016/j.autcon.2010.09.010

Kaklauskas, A., Zavadskas, E. K., Raslanas, S., Ginevicius, R., Komka, A., & Malinauskas, P. (2006). Selection of low-e windows in retrofit of public buildings by applying multiple criteria method COPRAS: A Lithuanian case. Energy and Buildings, 38(5), 454-462. https://doi.org/10.1016/j.enbuild.2005.08.005

Khaddaj, M., & Srour, I. (2016). Using BIM to Retrofit existing buildings. Procedia Engineering, 145, 1526-1533. https://doi.org/10.1016/j.proeng.2016.04.192

Kim, C., Son, H., & Kim, C. (2013a). Automated construction progress measurement using a 4D building information model and 3D data. Automation in Construction, 31, 75-82. https://doi.org/10.1016/j.autcon.2012.11.041

Kim, H., Anderson, K., Lee, S., & Hildreth, J. (2013). Generating construction schedules through automatic data extraction using open BIM (building information modeling) technology. Automation in Construction, 35, 285-295. https://doi.org/10.1016/j.autcon.2013.05.020

Kim, H., Shen, Z., Kim, I., Kim, K., Stumpf, A., & Yu, J. (2016b). BIM IFC information mapping to building energy analysis (BEA) model with manually extended material information. Automation in Construction, 68, 183-193. https://doi.org/10.1016/j.autcon.2016.04.002

Kim, J. B., Jeong, W., Clayton, M. J., Haberl, J. S., & Yan, W. (2015). Developing a physical BIM library for building thermal energy simulation. Automation in Construction, 50, 16-28. https://doi.org/10.1016/j.autcon.2014.10.011

Kim, K., & Cho, Y. K. (2015). Construction-specific spatial information reasoning in Building Information Models. Advanced Engineering Informatics, 29(4), 1013-1027. https://doi.org/10.1016/j.aei.2015.08.004

Kim, K., Cho, Y., & Zhang, S. (2016). Integrating work sequences and temporary structures into safety planning: Automated scaffolding-related safety hazard identification and prevention in BIM. Automation in Construction, 70, 128-142. https://doi.org/10.1016/j.autcon.2016.06.012

Kim, M. K., Wang, Q., Park, J. W., Cheng, J. C., Sohn, H., & Chang, C. C. (2016a). Automated dimensional quality assurance of full-scale precast concrete elements using laser scanning and BIM. Automation in Construction, 72, 102-114. https://doi.org/10.1016/j.autcon.2016.08.035

Kitchenham, B., Mendes, E., & Travassos, G. H. (2007). Cross versus within-company cost estimation studies: A systematic review. IEEE Transactions on Software Engineering, 33(5), 316-329. https://doi.org/10.1109/TSE.2007.1001

Kota, S., Haberl, J. S., Clayton, M. J., & Yan, W. (2014). Building Information Modeling (BIM)-based daylighting simulation and analysis. Energy and Buildings, 81, 391-403. https://doi.org/10.1016/j.enbuild.2014.06.043

Kreiner, H., Passer, A., & Wallbaum, H. (2015). A new systemic approach to improve the sustainability performance of office buildings in the early design stage. Energy and Buildings, 109, 385-396. https://doi.org/10.1016/j.enbuild.2015.09.040

Kumar, S. S., & Cheng, J. C. (2015). A BIM-based automated site layout planning framework for congested construction sites. Automation in Construction, 59, 24-37. https://doi.org/10.1016/j.autcon.2015.07.008

Kuo, H. J., Hsieh, S. H., Guo, R. C., & Chan, C. C. (2016). A verification study for energy analysis of BIPV buildings with BIM. Energy and Buildings, 130, 676-691. https://doi.org/10.1016/j.enbuild.2016.08.048

Laefer, D. F., & Truong-Hong, L. (2017). Toward automatic generation of 3D steel structures for building information modelling. Automation in Construction, 74, 66-77. https://doi.org/10.1016/j.autcon.2016.11.011

Lee, D. Y., Chi, H. L., Wang, J., Wang, X., & Park, C. S. (2016). A linked data system framework for sharing construction defect information using ontologies and BIM environments. Automation in Construction, 68, 102-113. https://doi.org/10.1016/j.autcon.2016.05.003

Lee, H. W., Oh, H., Kim, Y., & Choi, K. (2015). Quantitative analysis of warnings in building information modeling (BIM). Automation in Construction, 51, 23-31. https://doi.org/10.1016/j.autcon.2014.12.007

Lee, Y. C., Eastman, C. M., & Lee, J. K. (2015a). Validations for ensuring the interoperability of data exchange of a building information model. Automation in Construction, 58, 176-195. https://doi.org/10.1016/j.autcon.2015.07.010

Lee, Y. C., Eastman, C. M., & Solihin, W. (2016a). An ontology-based approach for developing data exchange requirements and model views of building information modeling. Advanced Engineering Informatics, 30(3), 354-367. https://doi.org/10.1016/j.aei.2016.04.008

Lee, S. K., Kim, K. R., & Yu, J. H. (2014). BIM and ontology-based approach for building cost estimation. Automation in Construction, 41, 96-105. https://doi.org/10.1016/j.autcon.2013.10.020

Li, X., Su, S., Zhang, Z., & Kong, X. (2017). An integrated environmental and health performance quantification model for pre-occupancy phase of buildings in China. Environmental Impact Assessment Review, 63, 1-11. https://doi.org/10.1016/j.eiar.2016.11.003

Liao, L., & Teo, E. A. L. (2017). Critical Success Factors for enhancing the Building Information Modelling implementation in building projects in Singapore. Journal of Civil Engineering and Management, 23(8), 1029-1044. https://doi.org/10.3846/13923730.2017.1374300

Liu, S., Meng, X., & Tam, C. (2015). Building information modeling based building design optimization for sustainability. Energy and Buildings, 105, 139-153. https://doi.org/10.1016/j.enbuild.2015.06.037

Lu, W., Webster, C., Chen, K., Zhang, X., & Chen, X. (2017). Computational Building Information Modelling for construction waste management: Moving from rhetoric to reality. Renewable and Sustainable Energy Reviews, 68, 587-595. https://doi.org/10.1016/j.rser.2016.10.029

Ma, Z., & Liu, Z. (2014). BIM-based intelligent acquisition of construction information for cost estimation of building projects. Procedia Engineering, 85, 358-367. https://doi.org/10.1016/j.proeng.2014.10.561

Markiz, N., & Jrade, A. (2014). Integrating a fuzzy-logic decision support system with bridge information modelling and cost estimation at conceptual design stage of concrete box-girder bridges. International Journal of Sustainable Built Environment, 3(1), 135-152. https://doi.org/10.1016/j.ijsbe.2014.08.002

Matthews, J., Love, P. E., Heinemann, S., Chandler, R., Rumsey, C., & Olatunj, O. (2015). Real time progress management: Re-engineering processes for cloud-based BIM in construction. Automation in Construction, 58, 38-47. https://doi.org/10.1016/j.autcon.2015.07.004

Matthews, J., Love, P. E., Mewburn, J., Stobaus, C., & Ramanayaka, C. (2018). Building information modelling in construction: Insights from collaboration and change management perspectives. Production Planning & Control, 29(3), 202-216. https://doi.org/10.1080/09537287.2017.1407005

Mazairac, W., & Beetz, J. (2013). BIMQL – An open query language for building information models. Advanced Engineering Informatics, 27(4), 444-456. https://doi.org/10.1016/j.aei.2013.06.001

McArthur, J. J. (2015). A building information management (BIM) framework and supporting case study for existing building operations, maintenance and sustainability. Procedia Engineering, 118, 1104-1111. https://doi.org/10.1016/j.proeng.2015.08.450

Melville, N., Kraemer, K., & Gurbaxani, V. (2004). Review: Information technology and organizational performance: An integrative model of IT business value. MIS Quarterly, 28(2), 283-322. https://doi.org/10.2307/25148636

Melzner, J., Hollermann, S., & Bargstadt, H. J. (2012). A multi-criteria decision-support approach for fall protection planning. In G. Gudnason, & R. Scherer (Eds.), Proc. of 9th European Conference on Product and Process Modelling, Ework and Ebusiness in Architecture, Engineering and Construction, 25–27 July 2012 (pp. 675-680). Reykjavik, Iceland. https://doi.org/10.1201/b12516-107

Merschbrock, C., & Munkvold, B. E. (2012). A Research Review on Building Information Modeling in Construction – An Area Ripe for IS Research. Communications of the Association for Information Systems, 31(1), 10.

Merschbrock, C., & Munkvold, B. E. (2015). Effective digital collaboration in the construction industry – A case study of BIM deployment in a hospital construction project. Computers in Industry, 73, 1-7. https://doi.org/10.1016/j.compind.2015.07.003

Migilinskas, D., Popov, V., Juocevicius, V., & Ustinovichius, L. (2013). The benefits, obstacles and problems of practical BIM implementation, Procedia Engineering, 57, 767–774. https://doi.org/10.1016/j.proeng.2013.04.097

Motawa, I., & Almarshad, A. (2013). A knowledge-based BIM system for building maintenance. Automation in Construction, 29, 173-182. https://doi.org/10.1016/j.autcon.2012.09.008

Motawa, I., & Carter, K. (2013). Sustainable BIM-based evaluation of buildings. Procedia-Social and Behavioral Sciences, 74, 419-428. https://doi.org/10.1016/j.sbspro.2013.03.015

Motuzienė, V., Rogoža, A., Lapinskienė, V., & Vilutienė, T. (2016). Construction solutions for energy efficient single-family house based on its life cycle multi-criteria analysis: a case study. Journal of Cleaner Production, 112, 532-541. https://doi.org/10.1016/j.jclepro.2015.08.103

Nath, T., Attarzadeh, M., Tiong, R. L., Chidambaram, C., & Yu, Z. (2015). Productivity improvement of precast shop drawings generation through BIM-based process re-engineering. Automation in Construction, 54, 54-68. https://doi.org/10.1016/j.autcon.2015.03.014

Niu, S., Pan, W., & Zhao, Y. (2015). A BIM-GIS integrated web-based visualization system for low energy building design. Procedia Engineering, 121, 2184-2192. https://doi.org/10.1016/j.proeng.2015.09.091

Østergård, T., Jensen, R. L., & Maagaard, S. E. (2016). Building simulations supporting decision making in early design – A review. Renewable and Sustainable Energy Reviews, 61, 187-201. https://doi.org/10.1016/j.rser.2016.03.045

Pautasso, M. (2013). Ten simple rules for writing a literature review. PLoS Computational Biology, 9(7), e1003149. Retrieved from https://doi.org/10.1371/journal.pcbi.1003149

Pavlovskis, M., Antucheviciene, J., & Migilinskas, D. (2016). Application of MCDM and BIM for evaluation of asset redevelopment solutions. Studies in Informatics and Control, 25(3), 293-302. https://doi.org/10.24846/v25i3y201603

Rolfsen, C. N., & Merschbrock, C. (2016). Acceptance of construction scheduling visualizations: Bar-charts, Flowline-charts, Or or Perhaps BIM?. Procedia Engineering, 164, 558-566. https://doi.org/10.1016/j.proeng.2016.11.658

Sacks, R., Treckmann, M., & Rozenfeld, O. (2009). Visualization of work flow to support lean construction. Journal of Construction Engineering and Management, 135(12), 1307-1315. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000102

Saoud, L. A., Omran, J., Hassan, B., Vilutienė, T., & Kiaulakis, A. (2017). A method to predict change propagation within building information model. Journal of Civil Engineering and Management, 23(6), 836-846. https://doi.org/10.3846/13923730.2017.1323006

Shad, R., Khorrami, M., & Ghaemi, M. (2017). Developing an Iranian green building assessment tool using decision making methods and geographical information system: Case study in Mashhad city. Renewable and Sustainable Energy Reviews, 67, 324-340. https://doi.org/10.1016/j.rser.2016.09.004

Shadram, F., Johansson, T. D., Lu, W., Schade, J., & Olofsson, T. (2016). An integrated BIM-based framework for minimizing embodied energy during building design. Energy and Buildings, 128, 592-604. https://doi.org/10.1016/j.enbuild.2016.07.007

Shou, W., Wang, J., Wang, X., & Chong, H. Y. (2015). A comparative review of building information modelling implementation in building and infrastructure industries. Archives of Computational Methods in Engineering, 22(2), 291-308. https://doi.org/10.1007/s11831-014-9125-9

Singh, M. M., Sawhney, A., & Borrmann, A. (2015). Modular coordination and BIM: Development of rule based smart building components. Procedia Engineering, 123, 519-527. https://doi.org/10.1016/j.proeng.2015.10.104

Soust-Verdaguer, B., Llatas, C., & García-Martínez, A. (2016a). Simplification in life cycle assessment of single-family houses: A review of recent developments. Building and Environment, 103, 215-227. https://doi.org/10.1016/j.buildenv.2016.04.014

Soust-Verdaguer, B., Llatas, C., & García-Martínez, A. (2016b). Critical review of bim-based LCA method to buildings. Energy and Buildings, 136, 110-120. https://doi.org/10.1016/j.enbuild.2016.12.009

Sun, C., Jiang, S., Skibniewski, M. J., Man, Q., & Shen, L. (2017). A literature review of the factors limiting the application of BIM in the construction industry. Technological and Economic Development of Economy, 23(5), 764-779. https://doi.org/10.3846/20294913.2015.1087071

Takim, R., Harris, M., & Nawawi, A. H. (2013). Building Information Modeling (BIM): A new paradigm for quality of life within Architectural, Engineering and Construction (AEC) industry. Procedia-Social and Behavioral Sciences, 101, 23-32. https://doi.org/10.1016/j.sbspro.2013.07.175

Turk, Ž. (2016). Ten questions concerning building information modelling. Building and Environment, 107, 274-284. https://doi.org/10.1016/j.buildenv.2016.08.001

Turskis, Z., Morkunaite, Z., & Kutut, V. (2017). A hybrid multiple criteria evaluation method of ranking of cultural heritage structures for renovation projects. International Journal of Strategic Property Management, 21(3), 318-329. https://doi.org/10.3846/1648715X.2017.1325782

Ustinovichius, L., Peckienė, A., & Popov, V. (2017). A model for spatial planning of site and building using BIM methodology. Journal of Civil Engineering and Management, 23(2), 173-182. https://doi.org/10.3846/13923730.2016.1247748

Valipour, A., Yahaya, N., Md Noor, N., Mardani, A., & Antuchevičienė, J. (2016). A new hybrid fuzzy cybernetic analytic network process model to identify shared risks in PPP projects. International Journal of Strategic Property Management, 20(4), 409-426. https://doi.org/10.3846/1648715X.2016.1210547

Venugopal, M., Eastman, C. M., & Teizer, J. (2015). An ontology-based analysis of the industry foundation class schema for building information model exchanges. Advanced Engineering Informatics, 29(4), 940-957. https://doi.org/10.1016/j.aei.2015.09.006

Volk, R., Stengel, J., & Schultmann, F. (2014). Building Information Modeling (BIM) for existing buildings – Literature review and future needs. Automation in Construction, 38, 109-127. https://doi.org/10.1016/j.autcon.2013.10.023

Volkov, A., Chelyshkov, P., & Lysenko, D. (2016). Information management in the application of BIM in construction. The roles and functions of the participants of the construction process. Procedia Engineering, 153, 828-832. https://doi.org/10.1016/j.proeng.2016.08.250

Wang, C., Cho, Y. K., & Kim, C. (2015). Automatic BIM component extraction from point clouds of existing buildings for sustainability applications. Automation in Construction, 56, 1-13. https://doi.org/10.1016/j.autcon.2015.04.001

Wang, G., & Song, J. (2016). The Relation of Perceived Benefits and Organizational Supports to User Satisfaction with Building Information Model (BIM). Computers in Human Behavior, 68, 493-500. https://doi.org/10.1016/j.chb.2016.12.002

Wang, K. C., Wang, W. C., Wang, H. H., Hsu, P. Y., Wu, W. H., & Kung, C. J. (2016). Applying building information modeling to integrate schedule and cost for establishing construction progress curves. Automation in Construction, 72, 397-410. https://doi.org/10.1016/j.autcon.2016.10.005

Won, J., & Lee, G. (2016). How to tell if a BIM project is successful: A goal-driven approach. Automation in Construction, 69, 34-43. https://doi.org/10.1016/j.autcon.2016.05.022

Won, J., Cheng, J. C., & Lee, G. (2016). Quantification of construction waste prevented by BIM-based design validation: Case studies in South Korea. Waste Management, 49, 170-180. https://doi.org/10.1016/j.wasman.2015.12.026

Wong, J. K. W., & Zhou, J. (2015). Enhancing environmental sustainability over building life cycles through green BIM: A review. Automation in Construction, 57, 156-165. https://doi.org/10.1016/j.autcon.2015.06.003

Yalcinkaya, M., & Singh, V. (2015). Patterns and trends in building information modeling (BIM) research: A latent semantic analysis. Automation in Construction, 59, 68-80. https://doi.org/10.1016/j.autcon.2015.07.012

Yan, H., & Damian, P. (2008). Benefits and barriers of building information modelling. In 12th International Conference on Computing in Civil and Building Engineering (Vol. 161). Retrieved from http://www.hetnationaalbimplatform.nl/files/pages/294_benefits-and-barriers-of-building-information-modelling.pdf

Yeh, C. C. (2017). Using a hybrid model to evaluate development strategies for digital content. Technological and Economic Development of Economy, 23(6), 795-809. https://doi.org/10.3846/20294913.2015.1071293

Zavadskas, E. K., & Vilutiene, T. (2006). A multiple criteria evaluation of multi-family apartment block's maintenance contractors: I – Model for maintenance contractor evaluation and the determination of its selection criteria. Building and Environment, 41(5), 621-632. https://doi.org/10.1016/j.buildenv.2005.02.019

Zhang, H., Kitchenham, B., & Pfahl, D. (2008). Reflections on 10 years of software process simulation modeling: a systematic review. In Making globally distributed software development a success story (pp. 345-356). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-540-79588-9_30

Zhang, L., Wu, X., Zhu, H., & AbouRizk, S. M. (2017). Perceiving safety risk of buildings adjacent to tunneling excavation: An information fusion approach. Automation in Construction, 73, 88-101. https://doi.org/10.1016/j.autcon.2016.09.003

Zhang, S., Sulankivi, K., Kiviniemi, M., Romo, I., Eastman, C. M., & Teizer, J. (2015a). BIM-based fall hazard identification and prevention in construction safety planning. Safety Science, 72, 31-45. https://doi.org/10.1016/j.ssci.2014.08.001

Zhang, S., Teizer, J., Lee, J. K., Eastman, C. M., & Venugopal, M. (2013). Building information modeling (BIM) and safety: Automatic safety checking of construction models and schedules. Automation in Construction, 29, 183-195. https://doi.org/10.1016/j.autcon.2012.05.006

Zhang, S., Teizer, J., Pradhananga, N., & Eastman, C. M. (2015). Workforce location tracking to model, visualize and analyze workspace requirements in building information models for construction safety planning. Automation in Construction, 60, 74-86. https://doi.org/10.1016/j.autcon.2015.09.009