Share:


Reinforcement characteristics of prestressed concrete beams with fiber-reinforced polymer (FRP) tendons

    Mantas Atutis Affiliation
    ; Juozas Valivonis Affiliation

Abstract

The basic advantages of fiber-reinforced polymer (FRP) reinforcement are reviewed. FRP tendons exhibit linear elastic response to rupture without yielding and thus failure is expected to be brittle. Structural beahaviour of beams prestressed with FRP tendons is different from that of beams with traditional steel reinforcement. Strength design approach for prestressed beams with FRP tendons is based on the concept of brittle ratio, reinforcement ratio at which concrete fails in compression at the same time as FRP tendon ruptures. Depending on reinforcement ratio, the flexural behaviour of the beam can be devided into several groups. If reinfrocement ratio is equal to brittle ratio, beams fail by rupture of tendons and crushing of concrete simultaneously. Beams with reinforcement ratio, less than brittle ratio, are under-reinforced and will fail by rupture of tendons. When reinforcement ratio is greater than brittle ratio, concrete fails in compresion prior to rupture of tendons. Brittle ratio was calculated by different expressions proposed in scietific literature, and particular results were given. It has been shown, that brittle ratio is influenced by the mechanical properties of FRP and concrete.


Article in Lithuanian.


Lenkiamųjų iš anksto įtemptų gelžbetoninių elementų armavimo kompozitine armatūra ypatumai


Santrauka. Straipsnyje aptariamos pagrindinės iš anksto įtempto gelžbetonio kompozitinės armatūros (FRP) savybės. Kompozitinė armatūra iki pat lenkiamųjų gelžbetoninių ar iš anksto įtempto gelžbetonio elementų laikomosios galios netekimo išlaiko tampriąsias savybės. Šia armatūra armuotų sijų, lyginant su tradicine plieno armatūra, elgsena skiriasi. Galimi keli kompozitine (FRP) armatūra armuotų lenkiamųjų elementų suirimo atvejai. Konstrukcijų su kompozitine (FRP) armatūra suirimo pobūdis gali būti nustatytas remiantis mokslinėje literatūroje pasiūlytomis formulėmis racionaliam armavimo procentui apskaičiuoti. Gauti skirtingi skaičiavimų rezutlatai. Parodyta, kaip armavimo procentas priklauso nuo mechaninių betono ir neplieninės (FRP) armatūros savybių.


Reikšminiai žodžiai: anglies pluoštasarmavimo procentasišankstinis įtempimastamprumo modulisrelaksacija.


First Published Online: 16 May 2013

Keyword : prestressed concrete, fiber-reinforced polymer tendons

How to Cite
Atutis, M., & Valivonis, J. (2010). Reinforcement characteristics of prestressed concrete beams with fiber-reinforced polymer (FRP) tendons. Engineering Structures and Technologies, 2(2), 71-78. https://doi.org/10.3846/skt.2010.10
Published in Issue
Jun 30, 2010
Abstract Views
331
PDF Downloads
550
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.