Share:


Generating the open space 3D model based on LiDAR data

    Aušra Kalantaitė Affiliation
    ; Eimuntas Kazimieras Paršeliūnas Affiliation
    ; Denis Romanovas Affiliation
    ; Dominykas Šlikas Affiliation

Abstract

An open space could be defined as a space, which is restricted by a surface, that is generated over the physical Earth‘s surface, natural and artificial objects, and in which the distances between its objects are less than given critical tolerance. In other words, we have in mind the moving objects of certain dimensions, which could freely move in such an open space. The technological peculiarities of an open space 3D model generation are analysed. In general, the two sources of data were suggested to apply: the raw LiDAR data and the orthophotomaps. The method for generating an open space surface is presented too. An open space 3D model of the experimental territory was generated. The data of single orthophotomap on a scale of 1:10000 was applied. LiDAR and orthophotomap data is for the year 2009.

Keyword : LiDAR, orthophotomap, digital surface model, open space model

How to Cite
Kalantaitė, A., Paršeliūnas, E. K., Romanovas, D., & Šlikas, D. (2012). Generating the open space 3D model based on LiDAR data. Geodesy and Cartography, 38(4), 152-156. https://doi.org/10.3846/20296991.2012.758438
Published in Issue
Dec 21, 2012
Abstract Views
458
PDF Downloads
364
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.