Share:


Development of K-BIM e-Submission prototypical system for the openBIM-based building permit framework

    Inhan Kim Affiliation
    ; Jungsik Choi Affiliation
    ; Evelyn Ai Lin Teo Affiliation
    ; Hongwei Sun Affiliation

Abstract

With the popularization of Building Information Modeling (BIM) technology, increasing numbers of countries are attempting to introduce BIM into their national building permitting processes. There are also many BIM-related research initiatives worldwide. Likewise, the Korean government has joined this trend by improving its existing e-Submission system, SEUMTER, to provide for BIM-based e-submission and automated code compliance checking. Further, the Ministry of Land, Infrastructure, and Transport in Korea has funded the Korea BIM (KBIM) building e-Submission system project. The Industry Foundation Classes (IFC) data model is an openBIM approach that has been designated as an international standard through the International Organization for Standardization. It is not dependent on specific design tools and is suitable for public works applications. Hence, this study performed a comprehensive analysis of and developed a framework for a prototypical system for an e-Submission process based on the IFC data model. Four main modules were developed to perform code checking, submission, pre-checking, and automated rule-making. A real-world project was used to verify the feasibility and effectiveness of the proposed framework. This study could increase the adoption of BIMbased building e-Submission systems by sharing effective and successful processes.

Keyword : building information modeling (BIM), industry foundation classes (IFC), building e-Submission system, automated code compliance checking, building code, pre-checking

How to Cite
Kim, I., Choi, J., Teo, E. A. L., & Sun, H. (2020). Development of K-BIM e-Submission prototypical system for the openBIM-based building permit framework. Journal of Civil Engineering and Management, 26(8), 744-756. https://doi.org/10.3846/jcem.2020.13756
Published in Issue
Nov 5, 2020
Abstract Views
259
PDF Downloads
86
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Bloch, T., & Sacks, R. (2018). Comparing machine learning and rule-based inferencing for semantic enrichment of BIM models. Automation in Construction, 91, 256–272. https://doi.org/10.1016/j.autcon.2018.03.018

British Standards Institution. (2013). BSI 2013 PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling. London, UK.

Building and Construction Authority. (2015). Deadlines for projects requiring mandatory BIM e-Submission for regulatory approval. https://www.corenet.gov.sg/media/1170470/appbca-2015-07-circular-on-deadlines-for-mandatory-bime-submission.pdf

Building and Construction Authority. (2016a). Code of practice for Building Information Modelling (BIM) e-Submission. https://www.corenet.gov.sg/media/2157490/1_cp_for_bim_esubmission_gr_v1-1.pdf

Building and Construction Authority. (2016b). 2-Stage Innovation Grant (iGrant) call for proposals for solutions on automated code compliance check in BIM. https://www.corenet.gov.sg/media/2032978/igrant-circular-code-compliance-check-forbim-.pdf

Cheng, J. C. P., & Lu, Q. (2015). A review of the efforts and roles of the public sector for BIM adoption worldwide. ITcon, 20, 442–478.

Choi, J., & Kim, I. (2015). Development of an Open BIM-based Legality System for building administration permission services. Journal of Asian Architecture and Building Engineering, 14, 577–584. https://doi.org/10.3130/jaabe.14.577

Choi, J., & Kim, I. (2017). A methodology of building code checking system for building permission based on openBIM. In Proceedings of the 34th ISARC (pp. 945–950), Taipei, Taiwan. https://doi.org/10.22260/ISARC2017/0131

Choi, J., Choi, J., & Kim, I. (2014). Development of BIM-based evacuation regulation checking system for high-rise and complex buildings. Automation in Construction, 46, 38–49. https://doi.org/10.1016/j.autcon.2013.12.005

Choi, J., Lee, Y., & Kim, I. (2018). Development of application for generation of automatic 2D drawings based on openBIM. In Proceedings of the 35th ISARC (pp. 356–361), Berlin, Germany. https://doi.org/10.22260/ISARC2018/0050

D-COM Network portal. (2020). https://www.dcom.org.uk/about-d-com/

Dimyadi, J., Clifton, C., Spearpoint, M., & Amor, R. (2016). Computerizing regulatory knowledge for building engineering design. Journal of Computing in Civil Engineering, 30(5). https://doi.org/10.1061/(ASCE)CP.1943-5487.0000572

Eastman, C., Lee, J., Jeong, Y., & Lee, J. (2009). Automatic rulebased checking of building designs. Automation in Construction, 18, 1011–1033. https://doi.org/10.1016/j.autcon.2009.07.002

Eastman, C., Teicholz, P., Sacks R., & Liston, K. (2011). BIM handbook: a guide to building information modeling for owners, managers, designers, engineers and contractors (2nd ed.). Wiley.

Edirisinghe, R., & London, K. (2015). Comparative analysis of international and national level BIM standardization efforts and BIM adoption. In Proceedings of the 32nd International Conference of CIB W78 (pp. 149–158), Eindhoven, The Netherlands.

GeBIZ. (2020). Tender No. BCA000ETT20300006. https://www.gebiz.gov.sg/

Getuli, V., Ventura, S., Capone, P., & Ciribini, A. (2017). BIMbased code checking for construction health and safety. Procedia Engineering, 196, 454–461. https://doi.org/10.1016/j.proeng.2017.07.224

Harty, J., Kouider, T., & Paterson, G. (2015). A guide for small and medium-sized architecture, engineering and construction firms (1st ed.). Routledge. https://doi.org/10.4324/9781315730721

Hjelseth, E. (2015). Public BIM-based model checking solutions: lessons learned from Singapore and Norway. Building Information Modelling (BIM) in Design, Construction and Operations, 149, 421–436. https://doi.org/10.2495/BIM150351

Infrastructure and Projects Authority. (2016). Government construction strategy 2016–2020. https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/510354/Government_Construction_Strategy_2016-20.pdf

International Organization for Standardization. (2018). ISO 16739-1:2018 Industry foundation classes for data sharing in the construction and facility management industries – Part 1: Data schema. https://www.iso.org/standard/70303.html

Kassem, M., Succar, B., & Dawood, N. (2015). Building Information Modeling: Analyzing noteworthy publications of eight countries using a knowledge content taxonomy. In R. Issa & S. Olbina (Eds.), Building information modeling: Applications and practices in the AEC industry (pp. 329–371). ASCE Press. https://doi.org/10.1061/9780784413982.ch13

Kim, H., Lee, J., Shin, J., & Choi, J. (2018a). Visual language approach to representing KBimCode-based Korea Building code sentences for automated rule checking. Journal of Computational Design and Engineering, 6(2), 143–148. https://doi.org/10.1016/j.jcde.2018.08.002

Kim, I., Jang, J., & Choi, J. (2018b). A study on the additional properties management method for building code automated checking by BIM. Korean Journal of Computational Design and Engineering, 23(2), 92–104. https://doi.org/10.7315/CDE.2018.092

Kim, I., Hwang, K., & Sun, H. (2019). The role of BIM data quality checking in the process of BIM based e-Submission. In i3CDE 2019 Proceedings, Penang, Malaysia.

Kim, K., & Yu, J. (2014a). Improvement of BIM-based building approval system. In Proceedings of the International Conference on Advances in Civil, Structural and Mechanical Engineering (CSME 2014) (pp. 17–21), Hong Kong.

Kim, K., & Yu, J. (2014b). Improvement of BIM-based building permit process. In Proceedings of the KCICI Academic Conference 2014, Seoul, South Korea.

Koo, B., & Shin, B. (2018). Applying novelty detection to identify model element to IFC class misclassifications on architectural and infrastructure Building Information Models. Journal of Computational Design and Engineering, 5(4), 391–400. https://doi.org/10.1016/j.jcde.2018.03.002

KBIMS website. (2020). KyungHee University Consortium. http://dq.kbims.or.kr/

Lee, H., Lee J., Park S., & Kim, I. (2016). Translating building legislation into a computer executable format for evaluating building permit requirements. Automation in Construction, 71(1), 49–61. https://doi.org/10.1016/j.autcon.2016.04.008

Lee, Y., Eastman, C., & Solihin, W. (2018). Logic for ensuring the data exchange integrity of building information models. Automation in Construction, 85, 249–262. https://doi.org/10.1016/j.autcon.2017.08.010

Malsane, S. M., Matthews, J., Lockley, S., Love, P. E., & Greenwood, D. (2015). Development of an object model for automated compliance checking. Automation in Construction, 49, 51–58. https://doi.org/10.1016/j.autcon.2014.10.004

Martins, J., & Monteiro, A. (2013). LicA: A BIM based automated code-checking application for water distribution systems. Automation in Construction, 29, 12–23. https://doi.org/10.1016/j.autcon.2012.08.008

National Building Specification. (2014, February18). NBS pioneering automated checking of building regulations. https://www.thenbs.com/about-nbs/press-releases/nbs-pioneeringautomated-checking-of-building-regulations

Norwegian Building Authority. (2016). Annual report: Good building for a good society. https://www.regjeringen.no/contentassets/bef58a2b56824de4bedb0d7c0e5d42da/2016_arsrapport.pdf

Ojo, A. O., Rahimian, F. P., Goulding, J., & Pye, C. (2015). Construction education requirements for achieving level 2 and 3 BIM. In ARCOM Doctoral Workshop on Construction Education in the New Digital Age (pp. 34–48), Birmingham City University, UK.

Preidel, C., & Borrmann, A. (2016). Towards code compliance checking on the basis of a visual programming language. Itcon, 21 (Special issue CIB W78 2015 Special track on Compliance Checking), 402–421.

Patacas, J., Dawood, N., Vukovic, V., & Kassem, M. (2015). BIM for facilities management: evaluating BIM standards in asset register creation and service life. ITcon, 20, 313–331.

Pauwels, P., Deursen, D. V., Verstraeten, R., Roo, J. D., Meyer, R. D., Walle, R. V., & Campenhout, J. M. (2011). A semantic rule checking environment for building performance checking. Automation in Construction, 20(5), 506–518. https://doi.org/10.1016/j.autcon.2010.11.017

Planning portal. (2020). https://www.planningportal.co.uk/

Public Procurement Service. (2019). Facility business BIM basic guidelines.

SEUMTER homepage. (2020). Version of SEUMTER. https://www.eais.go.kr

Sharma, S., Sawhney, A., & Arif, M. (2017). Parametric modelling for designing offsite construction. Procedia Engineering, 196, 1114–1121. https://doi.org/10.1016/j.proeng.2017.08.069

Shin, J., Choi, J., & Kim, I. (2015, October 11–14). A study on the development of BIM-based quality pre-checking system in architecture design phase. In Proceedings of the 6th International Conference on Construction Engineering and Project Management (ICCEPM 2015), Busan, Korea.

Solihin, W., Shaikh, N., Rong, X., & Poh, L. K. (2004). Beyond interoperability of building models: A case for code compliance checking [Conference presentation]. BP-CAD Workshop, Carnegie Melon University.

Solihin, W., Dimyadi, J., Lee, Y., Eastman, C., & Amor, R. (2017, July 4–7). The critical role of accessible data for BIM-based automated rule checking systems. In Proceedings of the Joint Conference on Computing in Construction (JC3). Lean and Computing in Construction Congress (LC3) (pp. 53–60). Heraklion, Greece.

Statsbygg. (2013). Statsbygg building information modelling manual. Version1.2.1 (SBM1.2.1).

Tan, X., Hammad, A., & Fazio, P. (2010). Automated code compliance checking for building envelope design. Journal of Computing in Civil Engineering, 24(2), 203–211. https://doi.org/10.1061/40937(261)32

Yu, J., Park, M., Lee, J., & Yeo, C. (2016). Introduction to the OpenBIM-based Design Cooperation (KBIM Collaboration) and the permission application support system (KBIM Submission). Korea Journal of Construction Engineering and Management, 17(4), 41–46.

Zadeh, P., Wang, G., Cavka, H., Staub-French, S., & Pottinger, R. (2017). Information quality assessment for facility management. Advanced Engineering Informatics, 33, 181–205. https://doi.org/10.1016/j.aei.2017.06.003

Zhang, J., & El-Gohary, N. (2017). Integrating semantic NLP and logic reasoning into a unified system for fully-automated code checking. Automation in Construction, 73, 45–57. https://doi.org/10.1016/j.autcon.2016.08.027

Zhou, P., & El-Gohary, N. (2017). Ontology-based automated information extraction from building energy conservation codes. Automation in Construction, 74, 103–117. https://doi.org/10.1016/j.autcon.2016.09.004