Share:


The effect of liquid glass on the deformation of refractory binder/Skystojo stiklo įtaka kaitrai atsparaus rišiklio deformacijoms

    Valentin Antonovič Affiliation
    ; Stasys Goberis Affiliation

Abstract

The structure formation of a refractory binder of liquid glass, ferrochrome slag and dispersed chamotte has been studied. It has been found that there is a close relationship between the density of liquid glass used and sharp expansion of binder at the temperature of 500–600 °C: the lower the density, the lower the expansion of the material. To find the reason for this deformation of a binder, the specimens of dried out liquid glass (sodium hydro silicates) heating tests (Fig 1) and the specimens of dried out mixtures of liquid glass and some inert refractory materials (Table 2) dilatometric tests (Fig 2) have also been made. This investigation showed that sodium hydro silicates films bloated during heating.


In order to determine structural changes under high temperature, X-rays investigation of refractory binder was made (Fig 5). This investigation showed that the reaction at the solid phase starts at the temperature over 600 °C and had no effect on the deformation of binder at 500–600 °C.


It has been shown that the deformations occurring at 500–600 °C are caused by bloating of sodium hydro silicates (non-reacted liquid glass during hardening) films of the binder.


First Published Online: 30 Jul 2012

Keyword : -

How to Cite
Antonovič, V., & Goberis, S. (2001). The effect of liquid glass on the deformation of refractory binder/Skystojo stiklo įtaka kaitrai atsparaus rišiklio deformacijoms. Journal of Civil Engineering and Management, 7(1), 29-33. https://doi.org/10.3846/13921525.2001.10531695
Published in Issue
Feb 28, 2001
Abstract Views
24
PDF Downloads
19