Vol 4 No 6 (2012): Mechanics, material science, industrial engineering and management / Mechanika, medžiagų inžinerija, pramonės inžinerija ir vadyba

Published: 2013-02-04

Article

A case study on biomass burning in Vaidotai settlement

Tomas Ališauskas, Gintas Viselga, Algirdas Jasinskas
Abstract 250 | PDF Downloads 250 | DOI https://doi.org/10.3846/mla.2012.83

Page 519-522

Modelling a compliant-based precise positioning stage

Giedrius Augustinavičius, Audrius Čereška
Abstract 228 | PDF Downloads 149 | DOI https://doi.org/10.3846/mla.2012.84

Page 523-527

Paper and prints as composite materials

Simona Markulytė, Jonas Sidaravičius, Vytautas Turla
Abstract 277 | PDF Downloads 200 | DOI https://doi.org/10.3846/mla.2012.85

Page 528-532

Research into the influence of the acoustic field on the efficiency of removing aerosols

Laura Stukaitė, Ina Tetsman, Vladas Vekteris
Abstract 239 | PDF Downloads 138 | DOI https://doi.org/10.3846/mla.2012.87

Page 537-540

Theoretical questions of applying smart materials for microactuators

Andrius Klevinskis, Vytautas Bučinskas, Lukas Daujotas
Abstract 237 | PDF Downloads 186 | DOI https://doi.org/10.3846/mla.2012.88

Page 541-545

Research into Ni-Cr-Si-B coating sprayed onto aluminium substrate using the method of plasma spray

Raimonda Lukauskaitė, Algirdas Vaclovas Valiulis, Olegas Černašėjus, Jelena Škamat
Abstract 233 | PDF Downloads 130 | DOI https://doi.org/10.3846/mla.2012.89

Page 546-549

Preperation for a clean surface

Aurimas Ralys, Valdemar Prokopovič, Vytautas Striška
Abstract 267 | PDF Downloads 215 | DOI https://doi.org/10.3846/mla.2012.90

Page 550-554

Research on the durability of the splints of lower limbs

Oleg Ardatov, Andžela Šešok
Abstract 241 | PDF Downloads 143 | DOI https://doi.org/10.3846/mla.2012.91

Page 555-558

Research on vibration isolation systems used in laser and nanotechnologies

Justinas Kuncė, Mindaugas Jurevičius
Abstract 236 | PDF Downloads 143 | DOI https://doi.org/10.3846/mla.2012.92

Page 559-563

Page 564-568

Quality analysis of cutting steel using laser

Vladislav Markovič
Abstract 265 | PDF Downloads 123 | DOI https://doi.org/10.3846/mla.2012.94

Page 569-572

Research on machining prototypes using an industrial robot

Valdemar Smilgin, Mantas Štrimaitis, Mindaugas Jurevičius
Abstract 236 | PDF Downloads 133 | DOI https://doi.org/10.3846/mla.2012.95

Page 573-578

Investigation into the accuracy of colours reproduced by the ricoh printer

Andrius Gedvila, Jonas Sidaravičius
Abstract 248 | PDF Downloads 115 | DOI https://doi.org/10.3846/mla.2012.97

Page 583-587

Research on the effectiveness of aerators

Vytenis Leonavičius
Abstract 239 | PDF Downloads 167 | DOI https://doi.org/10.3846/mla.2012.98

Page 588-592

Research on dynamic parameters and position accuracy of pneumatics muscles

Edvard Sadovskij, Valdemar Prokopovič, Vadim Mokšin
Abstract 238 | PDF Downloads 129 | DOI https://doi.org/10.3846/mla.2012.99

Page 593-598

Research on the influence of an acoustic field on particle cohesion in liquid

Ramūnas Vilkišius, Andrius Styra, Vladas Vekteris
Abstract 232 | PDF Downloads 106 | DOI https://doi.org/10.3846/mla.2012.100

Page 599-603

Research on the properties of thermal sprayed Ni-Cr-Si-Fe-B coatings

Raimonda Lukauskaitė, Donatas Šiurkus, Olegas Černašėjus
Abstract 266 | PDF Downloads 142 | DOI https://doi.org/10.3846/mla.2012.101

Page 604-607