Vol 2 No 4 (2010): Mechanics, material science, industrial engineering and management
Published: 2010-08-31
Article
Investigation into the quality of thermally treated package lamination
Abstract 243 | PDF Downloads 124 | DOI https://doi.org/10.3846/mla.2010.058
Page 5-9
Investigation into delamination
Abstract 244 | PDF Downloads 109 | DOI https://doi.org/10.3846/mla.2010.059
Page 10-12
Research on transfering the dynamic process by the spring
Abstract 228 | PDF Downloads 102 | DOI https://doi.org/10.3846/mla.2010.060
Page 13-17
The influence of formulating a damping solution on dot gain
Abstract 250 | PDF Downloads 104 | DOI https://doi.org/10.3846/mla.2010.061
Page 18-23
Adhesive analysis of painted coatings
Abstract 262 | PDF Downloads 324 | DOI https://doi.org/10.3846/mla.2010.062
Page 24-27
The methodology for calculating book backbones
Abstract 228 | PDF Downloads 232 | DOI https://doi.org/10.3846/mla.2010.063
Page 28-30
Research on the influence of orthopaedic inserts on pressure distribution in the foot
Abstract 256 | PDF Downloads 214 | DOI https://doi.org/10.3846/mla.2010.064
Page 31-34
Research of human postural balance parameters
Abstract 246 | PDF Downloads 360 | DOI https://doi.org/10.3846/mla.2010.065
Page 35-38
About the possibility of using ultrasound in thermal spray technologies
Abstract 224 | PDF Downloads 126 | DOI https://doi.org/10.3846/mla.2010.066
Page 39-41
Research on the efficiency of side exhausters
Abstract 234 | PDF Downloads 132 | DOI https://doi.org/10.3846/mla.2010.067
Page 42-45
Review of devices for measuring angles and prospects for development
Abstract 234 | PDF Downloads 175 | DOI https://doi.org/10.3846/mla.2010.068
Page 46-49
Research on the efficiency of drinking water aeration systems
Abstract 285 | PDF Downloads 119 | DOI https://doi.org/10.3846/mla.2010.069
Page 50-52
The impact of the welded joints made of X8CrNiTi18–10 stainless steel on the reliability estimation of pipes
Abstract 262 | PDF Downloads 112 | DOI https://doi.org/10.3846/mla.2010.070
Page 53-58
Sorting plastic waste in hydrocyclone
Abstract 323 | PDF Downloads 163 | DOI https://doi.org/10.3846/mla.2010.071
Page 59-61
Protection of intellectual property in pharmaceutical industry
Abstract 263 | PDF Downloads 141 | DOI https://doi.org/10.3846/mla.2010.072
Page 62-64
The research of influence of vibromechanical treatment on ni coatings PT-19N-01 adhesion
Abstract 247 | PDF Downloads 99 | DOI https://doi.org/10.3846/mla.2010.073
Page 65-68
Methods of forecasting in foreign exchange market
Abstract 279 | PDF Downloads 169 | DOI https://doi.org/10.3846/mla.2010.074
Page 69-72
Research on the mechanical properties of the weld seams of constructional steel using vibration energy method during welding
Abstract 267 | PDF Downloads 186 | DOI https://doi.org/10.3846/mla.2010.075
Page 73-76
Methodical aspects of creativity stimulation for the purposes of innovation development
Abstract 273 | PDF Downloads 504 | DOI https://doi.org/10.3846/mla.2010.076
Page 77-82
Research on cutting the plasma of aluminium alloys
Abstract 260 | PDF Downloads 155 | DOI https://doi.org/10.3846/mla.2010.077
Page 83-87
The influence of feed rate on surface roughness of TIC–WC carbide and Al2O3 ceramics SAWN-OFF with inner edge of diamond disc
Abstract 247 | PDF Downloads 102 | DOI https://doi.org/10.3846/mla.2010.078
Page 88-90
Research of defects in spur gear
Abstract 239 | PDF Downloads 152 | DOI https://doi.org/10.3846/mla.2010.079
Page 91-94
Research on the time-dependent adaptation of arterial blood pressure considering load value
Abstract 248 | PDF Downloads 133 | DOI https://doi.org/10.3846/mla.2010.080
Page 95-97
A case study on improving the process of decision making in industrial companies
Abstract 283 | PDF Downloads 144 | DOI https://doi.org/10.3846/mla.2010.081
Page 98-102
Typical lexical and syntactical mistakes in technical treatises
Abstract 246 | PDF Downloads 1651 | DOI https://doi.org/10.3846/mla.2010.082
Page 103-106